The Specifications Concerning Inspecting The Garage Door

A garage door opener is actually the largest moving component in your home therefore it is important that it be inspected in order to make certain that it works normally and also safely. With many functioning aspects a home inspector ought to look at all aspects diligently in order to ensure adequate operation as well as look out for potential safety hazards.

Here are some of the sites to assess and tests you can complete to ensure that you do not miss any concerns:.

Examine the door for fatigue - Look out for damage or structural irregularities especially on older doors.

Emergency Release - If a door comes down it can potentially trap a child or a small animal. There really should be an emergency release cord to disengage the automatic operator and allow a homeowner to lift the door and release whomever is trapped.

Pressure Release - With the door entirely open position a 2x4 flat and close the door. As it hits the 2x4 it should sense the pressure and switch direction.

Photo eyes - Ensure that the eyes are present on doors that have been put in since 1992 (if the date is known). These eyes ought to be situated near the floor (generally within 4"-6"). With the door lowering, swing your leg or some other item between the photo eyes and the door should reverse.

Wall Button - The button really should be at the very least 5 feet above the standing surface and high enough to be out of reach of small children.

Safety Cables - Are the springs restrained by safety cables in case the springs break? If a spring breaks the safety cable will help to keep metal components from flying through the air. Torsion springs will not require these safety cables as the torsion bar works as a containment device.

While these are the major concerns to look at, be sure that you look at all moving components as well as the overall door condition.

Comments? Questions? Email Here

© HowtoAdvice.com

How to Advice .com