Choosing The Right Table Saw For You!
The most crucial item you will purchase for your shop is the table saw. The quality and size of your projects will be determined by the precision and capacity of your saw. The sole determining factor should not be the price, in case you cannot afford the saw that you want, wait till you can afford it. Consider what your needs are and after that determine which machine will best fit those needs. Rushing into purchasing this machine without first doing all your reading of table saw reviews will almost certainly cause you to buy A machine that won't fit your needs. There are many features to consider before you make your ultimate decision. Some of these features are: Blade size, Arbor size, motor horsepower, and ease of operation, tilt of a typical blade, fence operation, rip fence, and safety features. We'll discuss some of these features in this article today, but we won't be able to talk about everything in this one article.
ARBOR SIZE
Arbor size is 5/8" for a 10" blade and 1" or larger for blades larger than 10". The accuracy and smoothness of all your cuts will be based upon the strength and alignment of your Arbor. You have the ability to tilt the blade either left or right to the maximum of 45°. Be cautious to always tilt away from the safety fence so the work piece doesn't get pinched between the blade and also the fence and cause a kickback. Always bear in mind when operating a table saw to think of safety first.
KICKBACKS
If you allow it to become a practice to avoid standing exactly where the kickback will occur, then you're already more likely to avoid a flying piece of wood hitting you. There are plenty of kickback devices available on the market to help you avoid accidents. Remember that some kickback devices might be just as dangerous as a kickback itself. If you don't want metal flying at your own face then you ought to be careful and buy a wood or plastic kickback device. Simply be careful when you select the sort of kickback device you are likely to use. Always employ a push stick or similar device when cutting to avoid loss of fingers.
MOTOR HORSEPOWER
The blade size and horsepower are related to each other. Larger blades will need more horsepower to generate those deep cuts or rips that are necessary to cut those larger pieces. Insufficient horsepower can cause the blade to bind and in many cases get stuck in the heart of your cut, which is never a very good or safe situation. For blades which are 10" then you definitely should have at least 5 hp, 12" to 14" should be a minimum of 5 hp, and 14" to 16" should be at least 7 ½ hp.
Like I said before those are just a few of the factors to consider before you decide to purchase your table saw. Table saw reviews are a great way to gather all the information you need to make a smart purchase. Be certain you buy the right size saw you will need to complete all your future projects.
About the Author
Written by Jack Donaldson I have spent the majority of my life working with wood and on construction sites. A very good site to review is http://table-saw-reviews-site.com
Tell others about
this page:
Comments? Questions? Email Here