7 Effective Ways To Avoid Molds And Mineral Build-Up In Washing Machines
If you have experienced molds and mineral build-up in your washing machine too many times in the past, you are probably fed up with it by now. There are actually some brands of washers that are prone to the development of molds. Their design and construction do not allow the complete removal of used water. As a result, the interior of the machine remains moist. Molds and minerals tend to develop.
Before you start stomping your feet in frustration, you would want to check out the following ways that can avoid molds and mineral build-up.
1. Check your washing machine and find out if you can improve its ability to drain water. You might need to lower down the drain hose so that the water can be purged out easily.
2. After using your washer, get a clean dish rag and start drying up the drum. Dry all the parts you can reach in the washer interior. Also dry the rubber gasket if you have a front loader. Dry the areas that are prone to molds development. This will minimize the possibility of molds development.
3. Leave the door of your washer open. Allow air to circulate inside and dry the moist parts of the machine. If your washer has a cover, do not use it. Wait for at least an hour before closing the door and placing the cover.
4. Try installing an in-house filtration system. There are different types of filtration systems that can reduce hard minerals in tap water. You can try installing one on the faucet that supplies water to your washer. Use a filtration system that can get rid of hard minerals. They usually harden up in the pipes of the machine.
5. At least twice a month, run an empty water cycle in the highest water temperature settings. Add two cups of distilled white vinegar and half a bag of baking soda. Vinegar has the ability to loosen up molds and minerals. Baking soda can clean the interior drum and can get rid of unwanted washer odor. Use this method to clean your washer.
6. Avoid using a lot of detergent. Sometimes, detergent residues do not get washed off easily. They turn rancid inside the washer. Moreover, they also encourage the development of unwanted molds.
7. Some washers have trouble emptying out the detergent and bleach compartments effectively. After washing, check the compartments. Remove any lingering detergent or bleach.
These tips can help you prolong the life of your washer. Try using them when dealing with molds and mineral problems.
About the Author
I am sure you would not want to buy a washing machine that is prone to breakages. That being said, I am urging you to check out http://www.washingmachineadvisor.com to identify the durable washers available in the market today.
Tell others about
this page:
Comments? Questions? Email Here