What is Seattle Garage door spring?
Garage door springs are the most essential part of a garage door. Though we often overlook its importance, but it is the spring which keeps the garage door functioning smoothly. The springs do the actual work of lifting and closing the heavy garage door. The speed at which a garage door opens or closes is controlled by the springs.
Since these springs work under lot of tension to lift the heavy garage door, their maintenance is very important. When you realize the fact the garage door weighing up to four-hundred pounds is held up by only a few springs and cables, you’ll know why is it so important to maintain and replace old garage door springs from time to time.
Garage door springs are generally of two types- garage door torsion springs and garage door extension springs. The torsion springs are installed at the top of the garage roof, while extension springs are installed on either sides of the door. Generally, most houses have only one torsion spring installed. But it is safer to have at least two door springs installed so that in the event of one spring failing, the other can support the garage door.
If the garage door springs are working smoothly, one should be able to lift the garage door without any difficulty. But if a lot of effort is required to open the door, or if the door opens too quickly for convenience, it’s an indication that your garage door springs need to be replaced.
About the Author
seattle-garagedoor.com provides the best Garage Doors Seattle, Garage door Seattle installation Services for your residential Seattle Garage Door and commercial Seattle Garage Door. To know more about Seattle Garage Doors visit our website.
Tell others about
this page:
Comments? Questions? Email Here