EEZOX - ONE PRODUCT FIREARM MAINTENANCE

EEZ0X since 1984 has proven to be a solvent, lubricant, cleaner, and protector of both the metal on firearms but their stocks as well. Factory finishes on wooden stocks will be preserved and enhanced by the use of EEZOX.

My personal firearms have been cared for exclusively by EEZOX since my meeting Mr. Nasca at the Dallas, Texas Shot Show in the late 80’s. The hype was so good I purchased a small can. It sat in my gun room several years until I ran out of my old faithful cleaning solvents and in desperation found it behind the bench.

Shooting match requires the cleaning to be drudgery. The instructions required the removal of all the other lubricants and solvents prior to applying EEZOX. This cleaning is against everything I had been taught. I did it anyway to a Garand that was my High-Power weapon. A Spray can of carburetor cleaner removed all past protection and left a rifle vulnerable to everything. Then a coat of EEZOX liberally applied was slow to dry. Of course, my past association with petroleum products required this if the firearm was to be neglected in a cabinet for any length of time, oil it liberally. Over the years I had lost the instructions that weren’t on the can. In disgust, while still disassembled, most of the heavy coating was wiped away. It then dried rather quickly. To my surprise, the Garand had a different sheen to the parkerized surface and the bolt. A drop of water stood on the surface like a drop of water in oil.

Cleaning the bore of the powder and copper fowling required the old faithful solvent most of us have used for years. Once cleaned finally with the carburetor cleaner also, I applied EEZOX with a swab and then finished with a patch to remove the excess. Due to knee surgery that weapon sat in my garage 6 months. When removed I saw not any rust, just some dust from a hot dry summer. That wiped away easily and did not become gummy sticking to all moving parts.

The real surprise was the cleaning after shooting the next match. A nylon brush and several dry patches followed by a patch lightly saturated by EEZOX and nothing else came from the barrel. For kicks, a lightly oiled patch was clean as when it was inserted. A dry patch to remove the oil and she was clean and ready for the next shooting

EEZOX eliminates missed shots on a cold hunt because the lubricant froze. EEZOX is a functioning lubricant from 450 F to -95 F.

Once you have your gun thoroughly cleaned with EEZOX, a quick bore cleaning and wipe down after each time you fire will suffice. You will find that your actions will be much smoother and lead buildup gets less each time you use EEXOX.”

Fred at Bulbrry Barrel Works and Larry Seecamp of Seecamp pistols both highly recommend EEZOX. Visit the testimonial page at www.eezox.com and order from www.baldeagletraders.com. EEZOX can be ordered in 4 oz cans, pints, quarts, gallons, and 5 gallon containers and 3,7,18 ounce Aerosol cans

Comments? Questions? Email Here

© HowtoAdvice.com

How to Advice .com