Forklift Safety Tips

Operating a forklift is something that should be taken seriously, as there is a good deal of risk involved when driving heavy loads around a warehouse. Forklift safety is not a joke, and there are strict regulations in place to ensure that every forklift driver is as safety conscious as possible. Many a driver has been fired for failing to operate their forklift safely, so here are some forklift safety tips to help you as you begin your forklift training:

Keep your load as centered as possible. Loads that are not centered can be difficult to handle, and you should ensure that the heaviest portion of your load is as close to the forklift's front wheels as possible to ensure that your forklift doesn't tip.

Make sure the only load the forklift with as much as the forklift is capable of handling. Never load the forklift beyond its maximum capacity, as that is a surefire way to cause an accident or break the forklift.

Always approach a load carefully, and avoid moving too fast or making sudden moves. Regardless of how expert you think you are, you may find that moving too fast can cause an accident.

Be certain the forklift is directly in front of a load, but without being too near or far. Less than 1 foot but more than 8 inches of distance between the forklift and the load is the recommended distance.

Ensure that your forks are at the correct height when coming near a load, and take it slowly to give you time to adjust the forks as you get closer. Always set the direction control to neutral to ensure that you can approach the load properly.

Only lower and raise the forks once you have stopped completely and you are certain the brakes have been set.

Always check the overhead clearance when lifting a load. Be certain there are no sprinklers, pipes, or lights overhead that could be damaged by the rising load.

Avoid tilting the forks forward unless you are dropping off or picking up a load, as this could cause the forklift to tip over and fall forward.

When driving, avoid tilting the forks forward. Not only will this make the load unstable, but it could cause the forklift itself to become unstable and tip forward to fall over.

Always raise the load 4 or so inches from the stack beneath it to ensure that it clears the distance. If the forklift doesn't clear the distance, it could pull the lower load off the stack as you drive out.

Make sure the mast is returned to the vertical position before you begin to lower the load.

Keep the load between 6 and 8 inches from the floor as you lower it.

Following these forklift precautions and safety measures is the best way to ensure that you are safe as you operate the forklift. Safety with forklifts is not something to be scoffed at, as the forklift carries heavy loads that need to be handled with care.

Comments? Questions? Email Here

© HowtoAdvice.com

How to Advice .com