Woodworking Tips That Produce Great Results Every Time

Woodworking is fun, but as with everything else there are certain woodworking tips that you will need to know in order to make your project turn out the way you want it to.

You see, anyone can make a box, but can everyone make a box that looks perfect? Therein lies the problem, and this is what you need to work out. So what do you do? Luckily there are many people out there who have been in your shoes, and they have shared their knowledge with those who are just starting out. So let's talk about a few of the things that you will need to know in order to have an enjoyable woodworking experience.

Finish First

You cut and assemble all of your parts separately, but at some point you will need to apply stain to the wood. The trick is to put the stain on before putting the parts together. If you choose to put the object together first then you may find that you have created some hard to reach corners that simply cannot be stained. This is a bad situation which could result in a scrapped project. Worse yet, you might end up applying excessive stain to the project. However, if this does happen, dab it up with a wash cloth.

Clamping

One of the best woodworking tips anyone could ever give you is how important clamps are. Unfortunately there can also be problems with clamps. One of the problems is staining. This happens when the wood comes in contact with the clamps, and there is another problem as well. It could happen that you clamp the pieces too tight, which could possibly leave indentations in the wood, which doesn't look very appealing. Don't worry, almost everyone has done it at some point.

The best way that you can fix this is to add a layer of tape to the clamp. You can do this to the teeth as well, but in that case it will need to be something a bit thicker, such as a piece of foam. It is important however to make sure that you do not compromise the integrity of the clamp in your efforts to make it function more efficiently.

A Bit of Extra Help

Also, sometimes you'll find that you need to set two pieces of wood up on end, but you cannot seem to make them stay that way. So what you can do is to make your own little 'clamps', which are really more like placeholders. Essentially you are making a tongue and groove joint, where the stand you make is the tongue, and the board is the groove. Use any left-over wood you have to build the clamps, which I know will be of great help to you.

These are just a few great woodworking tips that you will be able to utilize quite easily. Naturally you will find your own way in this great hobby, but keep those tips in mind, as they come from experience.

Comments? Questions? Email Here

© HowtoAdvice.com

How to Advice .com