Creative Handicraft: Potholder from Scrap Fabrics

Creative Handicraft: Potholder from Scrap FabricsIf you need a gift for a special person, or just need some time to unwind, make a creative handicraft. Crafting is therapeutic when you are feeling stressed, and it again can yield a useful or decorative item. Everyone has some measure of creativity, and with modern kits and patterns, a creative handicraft does not have to end in frustration.If you have a stitching machine, you can learn to make a creative handicraft that will be a useful and welcome gift. Potholders are a great beginning sewing project that can be false from scrap pressing or unwanted clothing and a trip of dual - fold bias tape. Here are the simple instructions for this creative handicraft.First cut two 8 - inch ( 21 cm. ) squares of fabric to be the front and back of the potholder. Converge coordinating fabrics that dispute your kitchen for these pieces. To make it easier, you can make an 8 - inch square decoration from a piece of cardboard to use as a device. Cut more 8 - inch squares of any old material to stack for the filler. You want the place of textile squares to be thick enough to make sure you from a hot pot, but thin enough to be flexible and practical to be sewn through.Stack all layers so that the apparent layers are facing to the outside and the filling layers are inside. You can put a melt of large straight pins through all layers to carry them together. Immediately sew equitable across the middle of the reserve. Sew across the middle again, perpendicular to the first stitching. You will have divided the contend into 4 squares. Sew across the stack again from corner to corner, and and from the other gain to secure. The layers should be joined and sturdy now.To bind do in the untried edges of your creative handicraft, trim with scissors so that all the layers are again even at the edges. Open out one folded spire of the prejudice tape. The wider bias recording might seem to be easier to use, but the narrow type makes a neater finished product. Starting at one chalk up, pursuit up the edges of the tape with the edges of the potholder, and start stitching through all layers along the first fold line, which will be about 1 / 4 inch from the edge. Stitch neatly and slowly, attaching the opened disc all around the borderline until you reach the installation corner. Cut the bias tape zap, leaving 3 inches, ( 7 cm. ) to make into a unsettled coil.Fold the bias tape over the raw edge so that the middle fold lines up with the outside of the potholder and the other commune is hiding the raw tip of the bias cd. Now, for best results, hand sew the binding down, system a loop on your creative handicraft when you get to the tail end.This potholder is just one object of a creative handicraft you can create if you have a tapestry apparatus. When it is skillful, you will have a useful item made from all recycled materials. Feel free to endow this creative handicraft away or keep it for yourself.

Comments? Questions? Email Here

© HowtoAdvice.com

How to Advice .com