Installation tips for Log Cabins part 1
by Richard Arthur
This is mainly tips for installing the Lugarde range of log cabins although much of it can be applied to many other styles of cabins.With Lugarde and indeed many other makes it is essential that the base the log cabin is going to be built on is flat and level, this is particularly important on the perimeter of the building – the outside edge of the base. Our installers have often found a lovely level base across the middle only to find the edges roll away, it cannot be stressed enough the values of a well laid base. Ideally the base should be to the footprint of the building; this will enable the rain to fall past the base and into the ground rather than sit on the base resulting in water being trapped underneath. We have also found it useful with log cabins to have incorporated a damp proof membrane into the structure of the base, this is especially important if it is going to be insulated and used as a studio, office, gym etc.On delivery of the Lugarde you will receive 1 – 3 packages containing the parts required, it is important to check the outside of these packages for fitting instructions and a contents list. On average you should allow 2 days for the installation, and preferably this should be in dry, still conditions. It is very important that where possible you don’t allow the logs to get wet prior to installation as these can swell making it harder to put together.We suggest that all the parts are unpacked and laid out carefully into there various sections. Most kits are numbered or lettered according to the wall they belong to these are normally A, B, C, and D for the four walls. The doors and windows will be already made up in there frames, these should be carefully put to one side. In the package you will also find; angled pieces – these are the bargeboards, profiled wood – these are trims for over the doors and windows, thin slats – these are also trim for use on completion. You will also have numerous pieces of T
Tell others about
this page:
Comments? Questions? Email Here