Tips on How to Clean Dyson Vacuum Filters
Vacuums are of different types and all of them have filters. Other than vacuum bags, filters are very important accessory of any type of vacuum cleaners. The filters in the vacuum perform two main important functions. Firstly, it prevents the dust from kicking back into the air and secondly cleaning the motor. Irrespective of the type of vacuum cleaner you have, it is highly recommended to clean the filter after every six months. This same thing is also applicable for dyson vacuum filters.
Before you start cleaning dyson vacuum filters make sure that you check owner’s manual. Based on the model every cleaner has specific ways to clean filters. Dyson vacuum filters must be washed after every three to six months to maintain the efficiency of motor. Before starting off with any of the cleaning activity, ensure that cleaner is unplugged to prevent any kind of electric shock.
Next, go through the manual to locate the position of the dyson filters. If you have a HEPA filter, it is important to remove the clear bin. This should be followed by pressing the cyclone release button located at the top of clear bin. It will release the latch that holds the bin in its place. To slide out tilt it at nearly twenty degree angle. Though it is not important to clean the clear bin, but if the owners or any of his family members suffer from asthma or allergies, then cleaning is highly recommended at regular intervals.
In the next step the clear bin must be emptied to trash can or bag. This activity must be done outside the home only to ensure that dirt and dust are not re-entering into your home environment. A light shaking motion will release the dust from the bin after you have released the trigger holding the dust in clear bin. However, make sure that you have closed the clear bin while it is still inside the bag or trash to make the dust stay in can or bag. Cleaning clear bin greatly diminishes the amount of dust and dirt exposed to the filter after it has been cleaned to improve performance. You may clean the clear bin with water, but you must remember that before you insert it back into your Dyson vacuum it should be completely dry.
Dyson filters must be cleaned after every six months. But if the Dyson vacuum filters are used on a regular basis it must be cleaned from time to time to time to maintain its optimal performance. If you have circular dyson filter then the process is bit different.
First of all unplug the cleaner and then unclip and open filter cover and carefully lift the circular filter container. By gripping the tab lift out the foam filter from container. Make sure that you are washing it with mild detergent. Dry it completely before replacing them. While cleaning your Dyson vacuum, make sure that other vacuum accessory like Dyson vacuum belts and dyson filters are handled carefully. In fact, the accessories must be handled with care when the cleaning process is going on.
About the Author
Ken M had been working in cleaning industry for almost a decade and thus have sound knowledge on Dyson vacuum filters. He recommends maintaining filters parts like Dyson vacuum belts at regular intervals for best vacuum solution.
Tell others about
this page:
Comments? Questions? Email Here