Probably The Best Plastic Baler Machinery Providers in the World! Which Electrical Power Supply is Best For Your Needs

I have been working in the Cardboard Recycling Industry, for a number of years. I genuinely judge myself to be quite familiar about the diverse Plastic balers Designs supplied around the world.

One of the chief problems with small recycling baler equipment, is the electric motor size. Usually, a small baler is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They mostly operate at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The main reasons for using a small 240v motor is because it is slightly inexpensive and a good number of small establishments don't have a 3 Phase Power Supply.

These small cardboard balers can turn out cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. A large amount of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their waste balers, would be much more efficient and dependable in the long term.

An additional problem which frequently arises, is particular large warehouses may call for a much larger plastic baler machine, but they also don't possess any 3 Phase Power Supply. They may have need of a V250 or V500 Mill Size Baler, because their volume of cardboard or plastic waste is much higher.

Certain manufacturers do make the V250 waste baler, using a 240v motor, but this may prove costly and inefficient in the long term. This is because the electric motor runs so hot and both the capacitor and motor can burn out and be expensive to mend. The V500 Cardboard Baler is in general ALWAYS manufactured with a 3 phase motor. But many sites don't have the 3 phase electric power supply. There is either a big price to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.

In recent months, I have watched a specific Recycling Machine Supplier closely, called Strong Recycling Balers Ltd. They are UK based and deliver recycling machine Worldwide. Strong Recycling Balers ltd now solve all the problems above with some very cutting edge methods.

Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. Although there is a 415v 3 phase motor - the equipment only needs a single phase 220/240v power supply. Additionally, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase motors, but it is possible to use either a 220/240v single phase or 415v 3phase on this machinery. It is your preference at the order stage.

So whatever your requirements for a waste baler ranging from small to mill size, I would urge everyone to look on the Strong Recycling Balers site. This is because they will certainly use superior electric motors in construction and your power supply requirements can always be easily catered for. You can also call them directly on Tel +44 1384 567773.

Comments? Questions? Email Here

© HowtoAdvice.com