Probably The Best Cardboard Baler Machinery Providers in the World! What Electrical Power Supply is Perfect For Your Needs

I have been working in the Waste Recycling Business, for a number of time. I truly believe myself to be entirely informed about the various Cardboard baler Models built around the world.

Considered one of the foremost problems with small cardboard baler machinery, is the motor size. By and large, a small recycling machine is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage electric motors is not so powerful. They commonly run at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The foremost reasons for using a small 240v motor is because it is a little cheaper and the majority of small establishments don't have a 3 Phase Power Supply.

These small plastic balers can produce cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Most of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their cardboard baler, would be much more efficient and dependable in the long term.

Another difficulty which frequently occurs, is particular large warehouses may want a much bigger baler machine, but they also don't possess any 3 Phase Power Supply. They may necessitate a V250 or V500 Waste Baler, because their quantity of cardboard or plastic waste is much higher.

A number of manufacturers do make the V250 waste baler, using a 240v motor, but this may prove expensive and unreliable in the long term. This is because the motor runs so hot and both the capacitor and motor can burn out and be costly to mend. The V500 Waste Baler is in general ALWAYS built with a 3 phase motor. Although several sites don't have the 3 phase electric power supply. There is either a large price to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.

In recent times, I have watched a particular Waste Baler Supplier closely, called Strong Recycling Balers Ltd. They are UK based and provide waste baler machinery Worldwide. Strong Recycling Balers ltd now solve all the problems discussed with a few very innovative methods.

Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase motor. Although there is a 415v 3 phase electric motor - the equipment only needs a single phase 220/240v power supply. Furthermore, the V250 and V500 (Mill Size Baler) are of course fitted with 415v 3 phase motors, but it is possible to use either a 220/240v single phase or 415v 3phase on this machine. It is your selection at the order stage.

So whatever your needs for a recycling machine ranging from small to mill size, I would encourage everyone to browse on the Strong Recycling Balers web site. This is because they will automatically use better electric motors in assembly and your electric power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.

Comments? Questions? Email Here

© HowtoAdvice.com