Perhaps The Greatest Recycling Baler Equipment Suppliers in the World! What Electrical Power Source is Best For Your Needs

I have been working in the Waste Recycling Business, for a number of time. I genuinely believe myself to be extremely knowledgeable about the diverse Small baler Brands manufactured around the world.

One of the main problems with small waste baler equipment, is the motor size. Habitually, a small baler is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They more often than not operate at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The core factors for using a small 240v motor is because it is slightly more affordable and a good number of small establishments don't have a 3 Phase Power Supply.

These small waste baler machines can create cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Most of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their plastic baler machinery, would be much more efficient and dependable in the long term.

An additional problem that often arises, is certain large warehouses may call for a much bigger waste baler appliance, but they also don't possess any 3 Phase Power Supply. They may have need of a V250 or V500 Mill Size Baler, because their volume of cardboard or plastic waste is much higher.

Certain manufacturers do make the V250 waste baler, with a 240v motor, but this may prove expensive and unreliable in the long term. This is because the electric motor works so hot and both the capacitor and motor can burn out and be dear to repair. The V500 Waste Baler Machine is generally ALWAYS manufactured with a 3 phase motor. However some locations don't have the 3 phase power supply. There is either a large cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.

In recent times, I have worked with a particular Plastic Baler Manufacturer closely, known as Strong Recycling Balers Ltd. They are UK based and supply cardboard balers Worldwide. Strong Recycling Balers ltd now resolve every one of the problems discussed with some very innovative methods.

Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase electric motor. Although there is a 415v 3 phase motor - the machines only uses a single phase 220/240v power supply. In addition, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase motors, but it is possible to make use of either a 220/240v single phase or 415v 3phase on this machinery. It is your decision at the order stage.

So no matter what your requirements for a recycling machine ranging from small to mill size, I would encourage everybody to browse on the Strong Recycling Balers web site. This is because they will automatically apply better electric motors in assembly and your electric power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.

Comments? Questions? Email Here

© HowtoAdvice.com